One of the most common projects completed during a bathroom remodel is tiling. Adding tile to your bathroom can make the room look upscale and give the illusion of more space. On the floor, in the shower, or on the walls, tiling is an effective way to create an elegant and cohesive bathroom design. While the concept of tiling seems simple enough, it rarely ever is. Even the most proficient do-it-yourselfers have trouble installing tile as it takes a keen eye and great attention to detail. Learn why you should avoid DIY tiling during your bathroom remodel.
Tile needs to be perfect to avoid weird gaps or an uneven design. When you hire a professional bathroom remodeling contractor to complete your bathroom remodel, he or she will perform a layout analysis to determine the best way to layout the tile based on the room dimensions and similar factors. The average DIYer does not have tile layout software or tools and if they could get it, would not know how to use it. To ensure professional looking results, trust your bathroom remodel tile project to the experts.
Lack of Preparation
Preparation is one of the most important aspects of your bathroom remodel. If you are in a hurry to start your tiling project and fail to prepare, you may find that you run into problem after problem during installation and the results may look like it was done by an amateur. Many DIYs do not properly remove dirt and debris from the tiling surface before starting the project. This can result in an uneven or rough surface that is not properly leveled. When you hire a bathroom remodeling contractor you can rest assured that the surface will be correctly prepared for tiling.
When you install tile you want it to stay put for many years. How well your tiles stay put will depend on the adhesive you use, the amount, and the application used. Inexperienced tilers may not use the right type of adhesive or may use too much or not enough product. It is not enough to apply adhesive to just the corners and center of the tile. The adhesive should be applied evenly over the entire surface of the tile so that it will adhere properly to the contact surface.
Buying Too Few Tiles
In an effort to save money, many homeowners choose to buy fewer tiles than more. This can result in not enough tiles for the job and a lot of frustration. No one wants to be in the midst of a tiling job only to find out they have to run to the store for more tiles. As a general rule of thumb, you should purchase 15 to 20 percent more tiles than you actually need to account for miscalculations, breakages, and bad cuts. Keep the receipt and you can bring back any extra tile and receive a refund.
A professional bathroom remodeling contractor has an arsenal of tools at hand to complete any type of bathroom tiling project. However, most homeowners do not own these tools and it can be costly to go out and buy all new tools for the job. From bubble levels for an even layout to t-space for accurate spacing between the tiles, each tool plays an important role in a tiling job. Without a grout spread, tile cutter, and other tools, you may find that the results are poor and the job takes much longer than anticipated. To avoid the frustration of not having the right tools, hire a qualified professional.
Most types of tile are made from delicate materials that must be handled with care. Not just any type of saw can be used to cut tile. Using the wrong tool will usually cause the tile to chip or break due to uneven pressure. Inexperienced tilers may also have trouble measuring and cutting tiles even with the right tools. To ensure the perfect fit, tiles must be cut with great attention to detail. Cutting the tiles right the first time around can help you avoid wasted time and money.
Many DIYers make the mistake of using the wrong underlayment when installing bathroom tile, or not using underlayment at all. It is important to have a minimum of 1 ¼” of subfloor sheathing placed underneath the tile to provide the tiles with an adequate amount of strength. This underlayment material should also be placed above a mortar bed which is used to create a level surface and fill voids. Remember that while a mortar bed is a necessary part of a bathroom tiling project, it is not a substitute for proper tile adhesive.
Spacing your tiles evenly is critical for a professional result and for longevity. When you fail to space your tiles evenly, the tiles can become loose and possibly shift or break. When installing tiles, it is important that each tile is measured and a spacer is used to create an even gap. Hiring a bathroom remodeling contractor can ensure that each tile is properly spaced which allows sufficient room for grout. Having an adequate amount of grout between each tile is crucial to keep the tiles firmly in place and to prevent shifting over time.
Call a Bathroom Remodeling Contractor Today
Tiling a bathroom involves more than just slapping on some adhesive and placing tiles on a surface. It involves accurate measuring, cutting, and a perfectly planned layout for professional looking results. To avoid many of the common mistakes that happen to the average do-it-yourself, it is best to leave your bathroom remodel in the hands of an experienced and well-trained professional. If you do decide to go forward with your bathroom remodel on your own, know that you run the risk of wasting sufficient time and money if you run into problems along the way. Cut your risk by contacting a bathroom remodeling contractor in your area.